1 / 3

Apevia Prestige ATX 600W 80+ Gold Certified

PSU Tier C • Apevia • $ 51.99

Add to PC Build Add to Amazon Cart Compare

Reliable Power for Your Mid-Range Build

The Apevia Prestige ATX 600W 80+ Gold Certified power supply delivers stable, efficient power for everyday PCs, gaming rigs, and home office systems. With 80 PLUS Gold certification, it achieves up to 90% efficiency at typical loads, reducing heat and electricity costs.

Key Features

80 PLUS Gold Certified: High efficiency (up to 90% @115V, 92% @220V) saves energy and lowers heat output.
600W Continuous Output: Plenty of headroom for mid-range CPUs and GPUs.
ATX Form Factor: Standard 150x140x86mm size fits most ATX cases.
120mm Fan: Quiet cooling with smart airflow design.
Full Protections: OVP, UVP, OPP, OCP, OTP, SCP keep your components safe.
Non-Modular Cables: Fixed cables for budget-friendly reliability.

Performance and Compatibility

This PSU provides a single 24-pin ATX connector, an 8-pin EPS12V (4+4) CPU connector, two 6+2-pin PCIe connectors for graphics cards, four SATA connectors for drives, and three Molex plus a floppy adapter for legacy devices. It supports ATX12V and EPS12V standards, making it compatible with most motherboards and CPUs.

Who Is It For?

Ideal for budget-conscious builders creating a reliable system with a mid-range CPU like an Intel Core i5 or AMD Ryzen 5, paired with a single graphics card up to around 250W TDP. Perfect for gaming, content creation, or office productivity.

Why Choose Apevia Prestige?

Apevia is known for affordable yet dependable power supplies. The Prestige series combines Gold efficiency with robust protections, ensuring your system runs smoothly for years. Its non-modular design simplifies installation and reduces cost, making it a great value choice.

Key Specifications

Connector Type: ATX12V / EPS12V (non-modular)

Output Wattage: 600 Watts continuous

Form Factor: ATX (150 × 140 × 86 mm)

Wattage: 600 W

Cooling Method: Air-cooled, 120 mm fan

Design: Non-Modular

Protections: OVP, UVP, OPP, OCP, OTP, SCP

Efficiency: 80 PLUS Gold certified (≈ 90 % @115 VAC / ≈ 92 % @220 VAC)

Cable Set: 1X 24-pin ATX motherboard 1X 8-pin EPS12V (4+4) CPU connector 2X 6+2-pin PCIe 4X SATA 3X Four-Pin Peripheral (Molex) 1X Floppy-drive adapter

Detailed Parameters

Rated Power Output in Watts:: 600
Form Factor:: ATX, EPS

Where to Buy

Amazon

Pros

80 PLUS Gold certified for high efficiency and lower energy bills
600W continuous output sufficient for mid-range builds
Full suite of protections (OVP, UVP, OPP, OCP, OTP, SCP)
Quiet 120mm fan keeps noise levels low
Affordable price point for a Gold-rated PSU

Cons

Non-modular cable design can make cable management challenging
Only two PCIe connectors limit high-end multi-GPU setups
No RGB or premium aesthetics

Frequently Asked Questions

Is the Apevia Prestige 600W enough for an RTX 3060?

Yes, an RTX 3060 typically requires a 550W PSU, so 600W provides adequate headroom. Ensure your CPU and other components stay within the total power draw.

Does this PSU support the latest ATX 3.0 motherboards?

It uses standard ATX12V and EPS12V connectors, which are compatible with most ATX motherboards, including newer ones. However, it does not have the new 12VHPWR connector for RTX 40-series GPUs; use the included 6+2-pin PCIe adapters instead.

Is the Apevia Prestige 600W modular?

No, it is a non-modular power supply, meaning all cables are permanently attached. This can make cable management more difficult but reduces cost.

Compare Apevia Prestige ATX 600W 80+ Gold Certified with Similar PSUs